Tuesday, April 5, 2011

DBM Energy's record-breaking KOLIBRI battery passes government tests


Audi A2 converted with DBM Energy Cells

PRESS RELEASE


For over a year the KOLIBRI battery cells developed by DBM Energy have been performing reliably in electrically powered logistics vehicles. In October 2010, as part of a demonstration project, this innovative battery technology powered a conventional passenger car converted to electrical power over a distance exceeding 600
km, setting a worldwide record. 5,000 charging cycles document the range and longevity of the KOLIBRI LMP lithium-metal-polymer battery technology. Independent studies now also confirm the safety and performance of the KOLIBRI technology.

Safety
On 17 January 2011, the German Federal Institute for Materials Research and Testing (BAM - Bundesanstalt für Materialforschung und –prüfung) initiated a comprehensive test program to evaluate the safety aspects of the innovative LMP lithium-metal-polymer battery technology (KOLIBRI) developed by DBM Energy GmbH. The recently completed tests on individual battery cells confirm that the KOLIBRI technology used on the world record-setting drive on 26 October 2010 meets the required safety standards for use in stationary applications as well as in passenger and commercial vehicles.

The safety tests were conducted in accordance with the protocols established in the 5th edition of the UN Transport Test Manual for the Transport of Dangerous Goods published in 2009. The recommended testing methods for lithium batteries serve as an international standard. In eight exhaustive tests series, the KOLIBRI technology was examined to establish its safety when subjected to extreme climate and pressure variations, electrical short-circuiting, overload or inversed polarity as well as strong mechanical forces such as vibrations, show and heavy impact.DMB's LMP cells easily passed the entire range of tests.

"The LMP cells we tested stand out by their high degree of technical safety," said Prof. Schröder in explaining the results of the tests, which had been repeated a number of times. The LMP lithium-metal-polymer battery systems met all the standards set in the UN test series. The cells exhibited no leaks, did not generate heat exceeding 170 degrees Celsius, did not decompose or ignite, and maintained in excess of 90% of electrical tension.

In addition to the UN tests, the battery cells were also tested for fire risks. The LMP cells proved absolutely fire and explosion proof when exposed to direct fire. The BAM's Prof. Schröder concludes: "Overall it can be stated that the KOLIBRI cells completely fulfill all safety requirements for this type of technology."

Performance
Besides BAM's safety tests, the KOLIBRI technology was subjected to an independent range test by German certification institute DEKRA at its test center at the Lausitz EuroSpeedway racetrack in Klettwitz, Germany. The range of the LMP battery system on the Audi A2 test vehicle platform was determined following the procedures set down in the currently applicable
ECE-R 101 directive for measuring the range of vehicles equipped with an electric drive. The tests were conducted in facilities and with equipment that fully complied with testing protocol requirements.

At the time of determining testing parameters prior to commencing the test, the vehicle weight – empty weight not including driver – was measured below the approved total mass of 1,500 kilograms. The maximum energy delivered by the LMP battery was measured at 62.928 kWh. By comparison, the battery capacity registered at the time of the world record in October 2010 was 98 kWh. The lower capacity, however, proved sufficient for the range tests as per ECE-R 101, which require that a distance of at least 300 km be covered.

All test results of the KOLIBRI technology were subsequently verified and validated by DEKRA. This includes the initial battery charge after handing over the vehicle, recharging the battery over charging period of 12 hours, discharging the battery over a distance of 100 km at a constant speed of 70 km/h as well as determining the vehicle's driving resistance. The peak speed measurement during the 30-minute maximum speed segment was 100 km/h. The required condition of covering a distance of 300 km within 7 days was met in one session on a roller dynamometer, indicating a range of 454.83 kilometers with the 62,928 kWh LMP battery. Adjusted for the battery capacity of 98 kWh at the time of the worldwide
range record, the range would have been 714 km. The efficiency of the LMP battery was determined to be at 97%.

The test vehicle equipped with the KOLIBRI battery technology will be on
display on the BMWi (Federal Ministry of Economics and Technology)
stand in Hall 2 at the Hannover Messe Industrie trade fair and expo from 4
to 8 April 2011.

About DBM Energy
DBM Energy GmbH , founded in 2009 and based in Berlin, Germany,
manufactures high-performance energy storage systems. DBM Energy has
developed an innovative battery technology: KOLIBRI. This lithium-based
intelligent energy storage system is monitored, controlled and optimized via
integrated controllers to ensure optimum efficiency. The KOLIBRI technology finds
universal application as an energy storage system for stationary equipment,
electric passenger vehicles and commercial vehicles in the logistics and
manufacturing industries. As part of a demonstration project, an everyday vehcole
modified for electric power and equipped with the KOLIBRI technology covered a
distance exceeding 600 km with a single charge in October 2010, setting a
worldwide record
.

No comments:

Post a Comment